RStudio Distributor AgreementRStudio, PBC
This Distributor Agreement (the “Distributor Agreement”) is between the applicable distributor ("you” or “Distributor"), and RStudio, PBC. If you are agreeing to this Distributor Agreement not as an individual but on behalf of your company, then “Distributor” or “you” means your company, and you are binding your company to this Distributor Agreement.
** IMPORTANT - PLEASE READ CAREFULLY BEFORE YOU SUBMIT AN ORDER FOR PURCHASE OR RESALE **
This Distributor Agreement is a separate agreement from the agreement that RStudio has with its end users at www.rstudio.com/about/eula (as may be modified by RStudio from time to time, “End User Agreement"). For convenience and consistency, however, the definitions of certain terms related to our products and services (namely Software and Users) will be the same as those in the End User Agreement.
This Reseller Agreement does not have to be signed in order to be binding. You indicate your assent to the terms by clicking on the “I agree” (or similar button) that is presented to you at the time of your order.
1. Order Requirements.
To the extent that we make Software available for distribution, You may order such Software for distribution directly, and indirectly through Channel Partners (as defined in Section 2 below), to end users by following the directions set forth on our website (currently at www.rstudio.com). You must provide all of the requested information including, without limitation, whether you are reselling directly to the end user or using a Channel Partner, the identity of the Channel Partner and contact information, the identity of the end user, the end user’s business and email addresses, and the specific Software to be resold in the order ("Order"). All such information must be accurate and complete and must reflect bona fide orders you have received from end users.
2. Limited Right to Distribute.
Subject to this Agreement, we grant you non-exclusive, non-transferable right to distribute the Software specified in the Order to the end user specified in the Order, solely for use by such end user in accordance with the End User Agreement and, if applicable, to the Channel Partner specified in the Order solely for resale to such end user. This right to distribute does not apply to any other end user or Software (including without limitation any sale to any related party, organization or affiliate, or to any subsequent, additional or renewal sale to the same party) or any other Channel Partner.
You may engage Channel Partners to resell the Software to end users on your behalf provided that you have entered into a written, binding agreement with each Channel Partner that is consistent with this Agreement, imposes the obligations imposed on you hereunder, and is at least as protective of RStudio as this Agreement (a “Channel Partner Agreement”). You agree to be liable for any breach of the restrictions or obligations imposed on you hereunder even if such breach is by a Channel Partner and you agree to be liable for all acts, omissions, negligence, fraud and misconduct of your Channel Partners. For purposes hereof, a “Channel Partner” means a reseller, sales agent or other channel partner that resells the Software directly to an end user on your behalf.
3. Enforcement of End User Agreement.
3.1. End User Terms. All use of the Software by end users is subject to the End User Agreement, and you may not purport to impose any other terms pertaining to their use of the Software. You are responsible for ensuring that each end user enters into the End User Agreement, and an order for the Software which includes all limitations on Users and other quantity restrictions applicable to the end user’s order set forth in the Order (the “Restrictions”), in a manner that is legally binding upon the end user. This may require you to (a) notify each end user that the Software is subject to the End User Agreement and the Restrictions and that by placing an order with Distributor the end user agrees to the End User Agreement and the Restrictions, (b) include either a copy of or link to the End User Agreement and Restrictions in each quotation and order form you issue to the end user and (c) obtain from each end user written confirmation of acceptance of the End User Agreement and the Restrictions prior to the earlier to occur of acceptance of the order by Distributor or delivery of the Product.
You must provide evidence of such acceptance by the end user to RStudio upon request.
If you are distributing the Software through a Channel Partner, you must impose the foregoing requirements on your Channel Partner and ensure each end user has entered into and accepted the End User License Agreement as part of the end users order with your Channel Partner. You must provide evidence of such acceptance by the end user to RStudio upon request.
3.2. Enforcement Cooperation. You agree to immediately notify us of any known or suspected breach of the End User Agreement, Channel Partner Agreement, or the Restrictions, or other unauthorized use of the Software, and to assist us in the enforcement of the terms of the End User Agreement and enforce the terms of the Channel Partner Agreement.
4. Identification as Distributor.
Subject to this Agreement, you are permitted to identify yourself as an RStudio “Distributor” solely in connection with your distribution of the Software to end users directly and indirectly through your Channel Partners. You may not use any RStudio trademark, logo or service mark (“Marks”) except as permitted by RStudio’s Trademark Guidelines at www.rstudio.com/about/trademark . All goodwill arising from your use of Marks inures to the benefit of RStudio.
5. Payment and Delivery.
5.1. Fees. Your non-refundable, non-cancelable payment to RStudio is due when you submit your Order unless otherwise set forth in the Order and in any event no later than thirty (30) days from your receipt of an RStudio invoice. Any payment that is not paid when due shall be subject to a late payment charge at the rate of 1.5% for each month or part of a month (or, if lower, the highest rate permitted by applicable law) for any period during which the amount due shall remain unpaid. In the event that you have not made payments satisfactory to RStudio for previous transactions, RStudio reserves the right to require prepayment or other payment arrangements satisfactory to RStudio going forward. All amounts payable by you shall be paid in full without set-off, deduction or other withholding of any amount. You are solely responsible for collecting payment from your end user customers and Channel Partners. Late payment or nonpayment by any end user or Channel Partner to you shall not delay or excuse payment by you to RStudio hereunder.
5.2. Delivery. Promptly following receipt of payment, we will deliver the applicable Software license key and other information necessary for end users to download and use the Software directly to the delivery contact specified in the Order in accordance with our standard delivery procedures. If we deliver the license keys or logins to you, you agree that you will, in turn, deliver them directly to the end user specified in the Order (or to the Channel Partner specified in the Order who will then deliver them directly to the end user specified in the Order), and not to use or access the Software in any way. You and your Channel Partners must either delete all license keys promptly thereafter or maintain them in confidence. You agree not to (and will not allow any third party to) take any steps to interfere with or defeat any license keys.
5.3. Taxes. Payments made by you under this Agreement exclude any taxes or duties payable in respect of the Software in the jurisdiction where the payment is either made or received. To the extent that any such taxes or duties are payable by RStudio (other than taxes on RStudio’s net income), you must pay to RStudio the amount of such taxes or duties in addition to any fees owed under this Agreement. Notwithstanding the foregoing, you may have obtained an exemption from relevant taxes or duties as of the time such taxes or duties are levied or assessed. In that case, you will have the right to provide to RStudio any such exemption information, and RStudio will use reasonable efforts to provide such invoicing documents as may enable you to obtain a refund or credit for the amount so paid from any relevant revenue authority if such a refund or credit is available.
5.4. End User Pricing and Payment; Refunds. You will independently set your own pricing to each end user and Channel Partner. You bear all risk of non-payment by end users and Channel Partners, and you are solely responsible for all of your costs and expenses. You may not terminate an Order or receive any refunds due to non-payment by an end user or Channel Partner. If RStudio provides any refund to an end user under our standard return policy, RStudio, at its option, will refund the applicable amounts either directly to the end user or to you for distribution to the end user. You agree to cooperate with RStudio in connection with any such refund.
5.5. Audit. RStudio may engage an independent accountant, at RStudio’s sole expense, and upon reasonable notice and during normal business hours, to inspect your records related to your activities under this Agreement. If, upon performing such audit, it is determined that you have underpaid RStudio by an amount greater than five percent (5%) of the fees due RStudio in the period being audited, you will bear all reasonable expenses and costs of such audit in addition to its obligation to make full payment of all underpaid amounts plus interest at the rate of 1.5% for each month or part of a month (or, if lower, the highest rate permitted by applicable law). Further, the parties shall cooperate in good faith to implement any necessary auditing tools and enable the effective auditing by RStudio of the use of the Software by you and your end users.
If you provide any feedback, comments, suggestions, ideas, description of processes, or other information to us about or in connection with the Software, our other products, solutions, or services, or our Distributor program, including without limitation any ideas, concepts, know-how or techniques contained therein ("Feedback"), then you grant us a worldwide, royalty-free, fully-paid up, non-exclusive, perpetual, transferable and irrevocable (with right of sublicense) license to use, copy, modify, create derivative works of, and otherwise exploit the Feedback for any purpose, without any compensation to you or any restriction or obligation on account of intellectual property rights or otherwise. For clarity, no Feedback will be deemed your Confidential Information, and nothing in this Agreement (including without limitation Section 12 (Confidentiality)) limits RStudio’s right to independently use, develop, evaluate, or market products, whether incorporating Feedback or otherwise.
7. No Use Rights; Reserved Rights.
Only the end user customer of the Software (and its Users) may use the Software. You are not permitted to use any Software resold under this Agreement for your own benefit nor are your Channel Partners. To the extent that you or your Channel Partners nevertheless gain any access to the Software, all license restrictions in the End User Agreement apply to you and your Channel Partners. Notwithstanding anything to the contrary contained in this Agreement, except for the limited right to distribute the Software in Section 2 above, RStudio and its suppliers have and will retain all right, title and interest (including without limitation all patent, copyright, trademark, trade secret and other intellectual property rights) in and to all Software, service descriptions, documentation, user manuals, and underlying technology ("RStudio Technology"), and all copies, modifications and derivative works thereof, including without limitation as may incorporate Feedback. You acknowledge that you are obtaining only a limited right to distribute the Software and that irrespective of any use of the words “purchase”, “sale” or like terms hereunder no ownership rights are being conveyed to you under this Agreement or otherwise.
8. Distributor Obligations and Liability.
8.1. End User Relationships; Business Practices. You agree not to represent yourself as an agent or employee of RStudio and agree that we will have primary control over any end user communication regarding the Software once you submit an Order. You will not make any representations regarding RStudio, on RStudio’s behalf, or about any Software. You agree not to engage in any deceptive, misleading, illegal, or unethical practices that may be detrimental to RStudio or its products and agree to comply with all applicable federal, state and local laws and regulations while operating under this Agreement, including without limitation the U.S. Foreign Corrupt Practices Act and any similar laws or regulations in any applicable jurisdiction. You further agree to comply with all applicable export and import laws and regulations, including U.S. embargo and sanctions regulations and prohibitions on export for certain end uses or to certain end users. Without limiting the generality of the foregoing, you acknowledge and agree that the Software is prohibited for export or re-export to Cuba, North Korea, Iran, Libya, Syria and Sudan or to any person or entity on the U.S. Department of Commerce Denied Persons List or on the U.S. Department of Treasury’s lists of Specially Designated Nationals, Specially Designated Narcotics Traffickers or Specially Designated Terrorists, as such is changed from time to time. You will impose all of the foregoing obligations on your Channel Partners.
8.2. Indemnity. You are fully responsible for all liabilities and expenses of any type whatsoever that may arise on account of your and your Channel Partner’s distribution and resale of Software. You will indemnify, hold harmless and (at RStudio’s option) defend RStudio from and against any claims, demands, suits, proceedings, investigations, actions, losses, costs, expenses, settlement amounts, fines, penalties, damages and any and all other liabilities, including without limitation reasonable attorneys’ fees, arising from or relating to: (a) any breach or alleged by you or your Channel Partners of any term of this Agreement, (b) the issuance by you or your Channel Partners of any warranty or representation regarding RStudio or its products or services not specified in the End User Agreement, or (c) any of your or your Channel Partner’s other acts or omissions in connection with the marketing, distribution or resale of the Software.
9.1. Termination. We may terminate this Agreement if you materially breach any provision in this Agreement and fail to cure such breach within five (5) days of written notice of such breach. In addition, either party may terminate this Agreement for any reason or no reason upon thirty (30) days’ written notice to the other party. RStudio may also terminate this Agreement immediately upon notice to you if (a) it ceases to offer the current distributor or reseller program or (b) it reasonably believes that continuing hereunder could result in business or legal liability for RStudio or otherwise harm RStudio or its end users.
9.2. Effect of Termination. You expressly agree that RStudio will have no obligation or liability to you resulting from termination or expiration of this Agreement in accordance with its terms. Upon termination or expiration of this Agreement: (a) you must immediately cease identifying yourself as an RStudio Distributor and using RStudio Marks in connection with your resale activities hereunder, (b) you must destroy all Confidential Information in your possession and certify destruction (unless we request that you return such materials to us) and (c) Sections 5 (Payment and Delivery) (but only with respect to Orders completed during the Term), 6 (Feedback) and 7 (No Use Rights; Reserved Rights) through 14 (General) will survive. Notwithstanding any termination or expiration of this Agreement all End User Agreements with end users for the license of the Software which are in compliance with this Agreement shall survive for the subscription term set forth in the applicable Order. RStudio shall have no liability to you and you expressly waive any liability of RStudio, as a result of termination or expiration of this Agreement in accordance with its terms, including without limitation claims relating to loss of profit, goodwill, advertising costs, termination of employees, employees’ salaries, unrecovered expenditures, investments, inventory purchases, leases, property improvements, or any other items.
10. Changes to Agreement.
From time to time, we may modify this Agreement and/or our End User Agreement. The version of this Agreement and/or End User Agreement in place at the time you submit each Order is the version that will govern such order. We will use reasonable efforts to notify you of these changes through communications through our website or other forms of communication, but we also suggest that you bookmark this Agreement and/or the End User Agreement and read them periodically.
Except as otherwise set forth in this Agreement, each party agrees that all code, software inventions, know-how, methodologies, business, technical and financial information it obtains (as “Receiving Party") from the disclosing party ("Disclosing Party") constitute the confidential property of the Disclosing Party ("Confidential Information"), provided that it is identified as confidential at the time of disclosure or should be reasonably known by the Receiving Party to be Confidential Information due to the nature of the information disclosed and the circumstances surrounding the disclosure. Any RStudio Technology and any performance information relating to the Products shall be deemed Confidential Information of RStudio without any marking or further designation. Except as expressly authorized herein, the Receiving Party will hold in confidence and not use or disclose any Confidential Information. The Receiving Party’s nondisclosure obligation shall not apply to information which the Receiving Party can document: (i) was rightfully in its possession or known to it prior to receipt of the Confidential Information; (ii) is or has become public knowledge through no fault of the Receiving Party; (iii) is rightfully obtained by the Receiving Party from a third party without breach of any confidentiality obligation; (iv) is independently developed by employees of the Receiving Party who had no access to such information; or (v) is required to be disclosed pursuant to a regulation, law or court order (but only to the minimum extent required to comply with such regulation or order and with advance notice to the Disclosing Party). The Receiving Party acknowledges that disclosure of Confidential Information would cause substantial harm for which damages alone would not be a sufficient remedy, and therefore that upon any such disclosure by the Receiving Party the Disclosing Party shall be entitled to appropriate equitable relief in addition to whatever other remedies it might have at law.
12. DISCLAIMER OF WARRANTIES.
For the avoidance of doubt, any and all commitments, indemnities and other terms and conditions offered by RStudio with respect to use of the Software are made directly by RStudio to the end user in accordance with the End User Agreement and do not extend to you as a Distributor. RStudio and its licensors make NO WARRANTIES, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, TO YOU THE DISTRIBUTOR, AND EXPRESSLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT.
13. LIMITATION OF LIABILITY.
13.1. Waiver of Consequential Damages. TO THE FULLEST EXTENT ALLOWED BY LAW, NEITHER RSTUDIO NOR ITS SUPPLIERS SHALL BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND (INCLUDING WITHOUT LIMITATION LOST PROFITS, LOSS OF GOODWILL, LOSS OF BUSINESS, LOSS OF USE, LOST DATA, FAILURE OF SECURITY MECHANISMS, INTERRUPTION OF BUSINESS, OR THE COSTS TO COVER), REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES IN ADVANCE AND EVEN IF SUCH DAMAGES WERE REASONABLY FORSEEABLE.
13.2. Liability Cap. TO THE FULLEST EXTENT ALLOWED BY LAW, RSTUDIO’S AND ITS THIRDPARTY SUPPLIERS’ ENTIRE LIABILITY UNDER THIS AGREEMENT SHALL NOT EXCEED THE AMOUNTS ACTUALLY PAID BY DISTRIBUTOR TO RSTUDIO IN RESPECT OF THE ORDER THAT IS THE SUBJECT OF THE CAUSE OF ACTION IN THE TWELVE MONTHS IMMEDIATELY PRECEDING THE DATE THE CAUSE OF ACTION AROSE.
14. Dispute Resolution; Governing Law; Anti-Bribery
14.1. Dispute Resolution; Arbitration. In the event of any controversy or claim arising out of or relating to this Agreement, the parties hereto shall consult and negotiate with each other and, recognizing their mutual interests, attempt to reach a solution satisfactory to both parties. If the parties do not reach a settlement within a period of 60 days, any unresolved controversy or claim arising out of or relating to this Agreement shall proceed to binding arbitration under the American Arbitration Association (AAA) Rules. The parties shall seek to mutually appoint an arbitrator. If the parties cannot agree on a single arbitrator, then there shall be three (3) arbitrators: one selected by each party, and a third selected by the first two. Arbitration will take place in Boston, Massachusetts. All negotiations and arbitration proceedings pursuant to this Section 14.1 will be confidential and treated as compromise and settlement negotiations for purposes of all similar rules and codes of evidence of applicable legislation and jurisdictions. The language of the arbitration shall be English.
14.2. Governing Law; Jurisdiction. This Agreement will be governed by and construed in accordance with the applicable laws of the Commonwealth of Massachusetts, USA, without giving effect to the principles of that State relating to conflicts of laws. Each party irrevocably agrees that any legal action, suit or proceeding that is not otherwise subject to the arbitration provisions of Section 14.1 (Dispute Resolution; Arbitration) must be brought solely and exclusively in, and will be subject to the service of process and other applicable procedural rules of, the State or Federal court in Boston, Massachusetts, USA, and each party irrevocably submits to the sole and exclusive personal jurisdiction of the courts in Boston, Massachusetts, USA, generally and unconditionally, with respect to any action, suit or proceeding brought by it or against it by the other party.
14.3. Injunctive Relief; Enforcement. Notwithstanding the provisions of this Section 14, nothing in this Agreement shall prevent either party from seeking equitable or injunctive relief with respect to a violation of intellectual property rights, confidentiality obligations or enforcement or recognition of any award or order in any appropriate jurisdiction.
14.4. Exclusion of UN Convention and UCITA. The terms of the United Nations Convention on Contracts for the Sale of Goods do not apply to this Agreement. The Uniform Computer Information Transactions Act (UCITA) shall not apply to this Agreement regardless of when or where adopted.
14.5. Anti-Bribery. In conformity with the United States Foreign Corrupt Practices Act and the UK Bribery Act and with RStudio’s corporate policies regarding foreign business practices, you and your Channel Partners and your respective employees and agents will not directly or indirectly make and offer payment, promise to pay, or authorize payment, or offer a gift, promise to give, or authorize the giving of anything of value for the purpose of influencing an act or decision of an official of any government (including a decision not to act) or inducing such a person to use his influence to affect any such governmental act or decision in order to assist RStudio in obtaining, retaining, or directing any such business.
15. Government End Users.
The Software is commercial computer software. If the user or licensee of the Software is an agency, department, or other entity of the United States Government, the use, duplication, reproduction, release, modification, disclosure, or transfer of the Software, or any related documentation of any kind, including technical data and manuals, is restricted by a license agreement or by the terms of this Agreement in accordance with Federal Acquisition Regulation 12.212 for civilian purposes and Defense Federal Acquisition Regulation Supplement 227.7202 for military purposes. The Software was developed fully at private expense. All other use is prohibited.
This Agreement is the entire agreement between you and RStudio relating to the distribution of Software as described in this Agreement and supersedes all prior and contemporaneous oral or written communications, proposals and representations with respect to the Software or any other subject matter covered by this Agreement. You agree that any varying or additional terms contained in any purchase order or other written notification or document issued by you in relation to the Software resold by you to your end users hereunder shall be of no effect and all such terms or conditions shall be null and void. If any provision of this Agreement is held to be void, invalid, unenforceable or illegal, the other provisions shall continue in full force and effect. This Agreement may not be modified or amended except as described in Section 10 (Changes to Agreement) or otherwise with the written agreement of RStudio (which may be withheld in its complete discretion without any requirement to provide reasons). As used herein, “including” (and its variants) means “including without limitation” (and its variants). If either party to this Agreement breaches any provision of this Agreement relating to Confidential Information or intellectual property rights, there may not be an adequate remedy available solely at law; therefore, an injunction, specific performance or other form of equitable relief or monetary damages or any combination thereof may be sought by the injured party to this Agreement. No failure or delay by the injured party to this Agreement in exercising any right, power or privilege hereunder shall operate as a waiver thereof, nor shall any single or partial exercise thereof preclude any other or further exercise thereof or the exercise of any right, power or privilege hereunder at law or equity. The parties are independent contractors. This Agreement shall not be construed as constituting either party as a partner of the other or to create any other form of legal association that would give on party the express or implied right, power or authority to create any duty or obligation of the other party. This Agreement shall not be assigned by either party without the advance written consent of the other party; provided, however that either party may assign this Agreement without consent to its successor in a merger, acquisition or other change of control, including without limitation any sale of all or substantially all of a party’s assets or stock or business to which this Agreement relates. This Agreement shall be binding upon and inure to the benefit of the parties, their successors and permitted assigns. Any assignment in contravention of this section shall be void and of no effect. You agree that RStudio may use your name and may disclose that you are a Distributor of RStudio in RStudio advertising, press, promotion and similar public disclosures. You also hereby grant RStudio a non-exclusive, revocable license during the term of this Agreement to list your name and display your logo in the “Distributor” or similar section of RStudio’s website. Nothing in this Agreement is intended or shall be construed to give any person, other than the parties hereto and their successors and permitted assigns, any legal or equitable right, remedy or claim under or in respect of this Agreement or any provision contained herein.