Download RStudio Server v0.99.902

RStudio Server enables you to provide a browser based interface to a version of R running on a remote Linux server, bringing the power and productivity of the RStudio IDE to server-based deployments of R.

Do you need support or a commercial license?  Compare our commercial and open source products.

Let’s stay in touch. Your email will keep you in the loop.

Prerequisites

RStudio Server v0.99 requires Debian version 8 (or higher) or Ubuntu version 12.04 (or higher).

Installing R
RStudio requires a previous installation of R version 2.11.1 or higher. To install the latest version of R you should first add the CRAN repository to your system as described here:

You can then install R using the following command:

$ sudo apt-get install r-base
NOTE: if you do not add the CRAN Debian or Ubuntu repository as described above this command will install the version of R corresponding to your current system version. Since this version of R may be a year or two old it is strongly recommended that you add the CRAN repositories so you can run the most up to date version of R.

Download and Install

To download and install RStudio Server open a terminal window and execute the following commands (corresponding to the 32 or 64-bit version as appropriate). Note that the gdebi-core package is installed first so that gdebi can be used to install RStudio and all of its dependencies.

64bit
Size:  51.5 MB
MD5: 40a9baaef269be090a916152aa920c8c
Version:  0.99.902
Released:  2016-05-14

$ sudo apt-get install gdebi-core
$ wget https://download2.rstudio.org/rstudio-server-0.99.902-amd64.deb
$ sudo gdebi rstudio-server-0.99.902-amd64.deb
32bit
Size:  44.2 MB
MD5: f4aabd6773664aeb1e1cb5c67d1d6ca4
Version:  0.99.902
Released:  2016-05-14

$ sudo apt-get install gdebi-core
$ wget https://download2.rstudio.org/rstudio-server-0.99.902-i386.deb
$ sudo gdebi rstudio-server-0.99.902-i386.deb

Next Steps

See the Getting Started document for information configuring and managing the server.

Download the RStudio Server Professional Admin Guide

Prerequisites

RStudio Server v0.99 requires RedHat or CentOS version 5.4 (or higher) as well as an installation of R. You can install R for RedHat and CentOS using the instructions on CRAN: https://cran.rstudio.com/bin/linux/redhat/README.

RedHat/CentOS 6 and 7

To download and install RStudio Server open a terminal window and execute the commands corresponding to the 32 or 64-bit version as appropriate.

64bit
Size:  37 MB
MD5: aa018deb6c93501caa60e61d0339b338
Version:  0.99.902
Released:  2016-05-14

$ wget https://download2.rstudio.org/rstudio-server-rhel-0.99.902-x86_64.rpm
$ sudo yum install --nogpgcheck rstudio-server-rhel-0.99.902-x86_64.rpm
32bit
Size:  36 MB
MD5: 702319d390faf65b866b3e09826eb1a3
Version:  0.99.902
Released:  2016-05-14

$ wget https://download2.rstudio.org/rstudio-server-rhel-0.99.902-i686.rpm
$ sudo yum install --nogpgcheck rstudio-server-rhel-0.99.902-i686.rpm

RedHat/CentOS 5

NOTE: To install RStudio Server on RedHat/CentOS 5 you will need to enable the Extra Packages for Enterprise Linux (EPEL) repository. If you don’t already have this repository available you should add it to your system using the instructions found on the Fedora EPEL website.

To download and install RStudio Server open a terminal window and execute the commands corresponding to the 32 or 64-bit version as appropriate.

64bit
Size:  44.4 MB
MD5: ccbc9f3cd71e3b22fe4caf19760ae913
Version:  0.99.902
Released:  2016-05-14

$ wget https://s3.amazonaws.com/rstudio-server/rstudio-server-rhel5-0.99.902-x86_64.rpm
$ sudo yum install --nogpgcheck rstudio-server-rhel5-0.99.902-x86_64.rpm
32bit
Size:  43.3 MB
MD5: 40fd79d4f529fb02d2623f1ee40111e2
Version:  0.99.902
Released:  2016-05-14

$ wget https://s3.amazonaws.com/rstudio-server/rstudio-server-rhel5-0.99.902-i686.rpm
$ sudo yum install --nogpgcheck rstudio-server-rhel5-0.99.902-i686.rpm

Next Steps

See the Getting Started document for information configuring and managing the server.

Download the RStudio Server Professional Admin Guide

Prerequisites

RStudio Server v0.99 requires openSUSE or SLES version 11 (or higher).

Installing R

You can install R for SUSE Linux using the instructions on the CRAN SUSE download page: http://cran.rstudio.com/bin/linux/suse/.

Note that the binaries linked to from this page have one additional requirement that isn’t satisfied using the default repositories. Before installing R you should install the libgfortran43 package. This package is available from the SUSE Linux Enterprise SDK. If the SDK repository is available in your environment you can install libgfortran43 as follows:

$ sudo zypper install libgfortran43

Download and Install

To download and install RStudio Server open a terminal window and execute the commands corresponding to the 32 or 64-bit version as appropriate.

64bit
Size:  47 MB
MD5: c68cd8ef33592904c313eba640fcdb35
Version:  0.99.902
Released:  2016-05-14

$ wget https://download2.rstudio.org/rstudio-server-suse-0.99.902-x86_64.rpm
$ sudo zypper install rstudio-server-suse-0.99.902-x86_64.rpm
32bit
Size:  45.4 MB
MD5: 27e627646d6d07b127351f3e48d9b20f
Version:  0.99.902
Released:  2016-05-14

$ wget https://download2.rstudio.org/rstudio-server-suse-0.99.902-i686.rpm
$ sudo zypper install rstudio-server-suse-0.99.902-i686.rpm

Next Steps

See the Getting Started document for information configuring and managing the server.

Download the RStudio Server Professional Admin Guide

To install RStudio on other platforms you will need to build and install from source. Note that while it is likely that RStudio will correctly compile and install on your target platform the only platforms currently tested and certified are Debian, Ubuntu, and RedHat/CentOS.

A tarball containing source code for RStudio v0.99.902 can be downloaded from here.

The INSTALL file within the source distribution contains additional instructions on how to build and install from source. After successfully performing a make install you should also be sure to install the additional scripts and configuration files found within the src/server/extras directory (the INSTALL file describes these extras in more detail).

Next Steps

See the Getting Started document for information configuring and managing the server.

Download the RStudio Server Professional Admin Guide